Malvern Instruments products apply advanced technologies such as laser diffraction, Zeta potential measurement, Non-Invasive Back-Scatter optics, and Image analysis
Mastersizer range

You are here:HomeLaboratory productsMastersizer rangeConsumablesSmall volume dispersion unit consumables

Small volume dispersion unit consumables

User replaceable parts and standards for the DIF2021 small volume sample dispersion unit.

This page details the consumables available for the Mastersizer S Small volume dispersion units and provides additional information on when and why these parts should be replaced.

Parts available:
 
Quality Audit Standards - a consumable item for the Mastersizer
    
Quality Audit Standard (QAS3001B)
Box of ten 0.4g single-shot bottles of 15 to 150 µm particle size standard for performance verification, complete with measurement instructions and pass/fail criteria.
 
Why replace Mastersizer S spare parts
 
Buy Mastersizer S consumables
 
Consumable kit for the Mastersizer
    
Sample tubing (AWA4018)
Tubing from sample unit to flow cell.
50 Feet in length. (4.76 mm Bore X 1.6 mm Wall)
 
 
Buy Mastersizer S consumables
 
Replacement sample tubing for the Mastersizer
    
Windows and seals (PMW4015)
Pair of cell windows and Viton Seals for all Mastersizer Wet Dispersion Cells (except Hydro 2000µP).
 
 
Buy Mastersizer S consumables
 
Replacement sample tubing for the Mastersizer
    
Solvent resistant window seals (DIF4034)
Pair of Perlast Solvent-Resistant Seals (Solvent Resistance Code A for the MSX1/DIF2021 Wet Dispersion Cells.
 
 
Buy Mastersizer S consumables